background image

© Ferno / 234-1929-06 / July 2021

18

Model 35-ITA Incubator Transporter

6.3  Cleaning the Transporter

1.  Hand clean all surfaces of the transporter with warm water and a 

mild detergent.

2.  Rinse with warm, clear water. Dry the transporter with a towel or 

allow it to air-dry.

To clean the accessories, follow the cleaning instructions in their users’ 

manual.

6.4  Waxing the Transporter

While it is not necessary to wax this transporter, waxing the aluminum 

main frame or the painted legs will not damage them, and will help 

maintain the transporter’s appearance.
Disinfect and clean the transporter before applying wax. Use an 

automotive wax as directed by the wax manufacturer.

6 - MAINTENANCE

6.1  Maintenance Schedule

The transporter requires regular maintenance. Set up and follow a 

maintenance schedule. The table at right represents minimum intervals 

for maintenance.
Keep maintenance records. For a sample record sheet, see “Maintenance 

Record” on page 23.
When using maintenance products, follow the manufacturer’s directions 

and read the manufacturer’s material safety data sheets.

6.2  Disinfecting the Transporter

Wipe all surfaces with disinfectant. Follow the disinfectant manufacturer’s 

instructions for application method and contact time. Ferno recommends 

you inspect the transporter for damage as you disinfect it.

Minimum 

Maintenance

Each Use

As Needed

Monthly

Disinfecting 

(this page)

Cleaning

 (this page)

Waxing

 (this page)

Inspecting

 (page 19)

Lubricating

 (page 19)

 

NOTICE

Disinfectants and cleaners containing bleach, phenolics, or 

iodines can cause damage. Do not use products containing 

these chemicals.
Water under high pressure, or steam, can penetrate joints, 

flush away lubricant, and cause corrosion. Use caution when 

cleaning moving parts such as joints and hinges, and reapply 

lubricant if needed. See “Lubricating the Transporter” on 

page 21.
Using abrasive cleaning compounds or applicators on the 

transporter can cause damage. Do not use abrasive materials 

to clean the transporter.

 

WARNING

Improper maintenance can cause injury. Maintain the 

transporter only as described in this manual.

Summary of Contents for 35-ITA

























Reviews: