© Ferno / 234-1929-06 / July 2021
19
Model 35-ITA Incubator Transporter
6.5 Inspecting the Transporter
Have your service’s equipment maintenance personnel inspect the
transporter regularly. Follow the checklist at right and operate the
transporter through all its functions as described in this manual.
If inspection shows damage or excessive wear, remove the transporter
from service until repair is made. See “Parts and Service” on page 21.
Inspection Checklist
●
Are all components present?
●
Is the transporter free of excessive wear?
●
Are all screws, nuts, bolts, and roll pins securely in
place?
●
Do all moving parts operate smoothly and properly?
●
Does the transporter lock properly into each position?
●
Does the transporter load and unload properly?
●
Does the safety hook engage the safety bar?
●
Does the transporter roll smoothly?
●
Do the wheels have some tread?
●
Do the wheel locks engage properly and stop wheel
rotation?
●
Is the ambulance properly prepared for the
transporter with an approved Ferno fastening system
and safety hook installed?
●
Do installed accessories operate properly without
interfering with transporter operation?
6.6 Lubricating the Transporter
Disinfect and clean the transporter before applying lubricant. Use the
lubricants designated below to lubricate the transporter. Lubricate only
the numbered points . Do not lubricate points marked with the “do
not lubricate” symbol .
Use a small amount of lubricant (one or two drops). Lubricate identical
points on each side of the transporter. After applying lubricant, wipe off
any excess.
LUBRICATION POINTS
1.
Fold-down frame hinge
WRL-191S or SAE 30-weight oil (1-2 drops)
2.
X-frame
WRL-191S or SAE 30-weight oil (1-2 drops)
LUBRICATION-FREE ITEMS
Transport wheels
Do not lubricate
Loading wheels
Do not lubricate
Telescoping legs
Do not lubricate
Control handle mechanisms
Do not lubricate
NOTICE
Lubricating parts that should not be lubricated allows dirt
and foreign particles to collect on those parts, resulting in
damage. Lubricate
only
the numbered reference points
shown.
1
2
