FERNO/MAN/1121/226-R3/UK
23
5.25- Split-Scoop Large Patient Surface
(Option)
Also available for use on POWERX and CCT-PX is the Split Scoop
kit, which allows a standard Scoop EXL to be attached to the
trolley, the Scoop split in 2 halves with one half attached to
each side, giving a full-length extended patient surface for the
transportation of larger-size patients. For improved patient
comfort and tissue viability the Split-Scoop module can be
used in combination with optional inflatable side pads or foam
sidepads.
The Split Scoop fixing kit consists of 6 components; 2 fixing
brackets for head-end, 2 fixing brackets for foot-end and 2
extension fixing poles, all supplied in a carry bag.
5.25 - Attaching Split-Scoop Fixing Kit
To attach the Scoop to the trolley, first ensure that SX cotsides or
lateral-folding cotsides are placed in the fully-down position on
both sides of the stretcher.
SX cotsides moved to fully-down position
5.25 - Attaching Split-Scoop Fixing Kit
(cont....)
At the foot-end of the trolley, place one of the brackets with
the 'foot' label onto the upper profile of the siderail interface
that runs along the length of the trolley (refer to section 6.14),
slightly angled up at the end nearest to you. In the same way as
attaching an IV pole or any other accessory, the metal coloured-
grip profile of the bracket is behind and underneath the recess
that is situated on the rear-side of the siderail interface. Position
it as far towards the foot-end as possible on the siderail.
Attaching fixing bracket to siderail interface
Once the bracket is located in the siderail interface, make the
bracket level and then push the red handle down fully to lock the
bracket in place. Ensure that the handle is fully down and clicks
in place, then confirming that the bracket is indeed firmly locked
by trying to lift the bracket slightly.
Summary of Contents for CCT-PX
Page 38: ...FERNO MAN 1121 226 R3 UK 38...
Page 40: ...FERNO MAN 1121 226 R3 UK 40...
