Ferno Slovakia
Model S-265 Scoop
2
1.
Adjusting Stretcher Length
Adjust the length of the stretcher to the patient’s
height
before
uncoupling the halves. This ensures
equal adjustment to both halves.
TO LENGTHEN OR SHORTEN THE STRETCHER
1.
Move the lock-pin lever on each side of the
frame to the unlocked position (Figure 1)
Note:
When the stretcher is lying face-up on
a flat surface, the locked position is “down”
and the unlocked position is “up” (Figure 1)
2. Pull the foot section outward to the desired
length, stopping near one of the locking
positions located at the holes along the foot-
section frame.
3. Return both lock-pin levers to the locked
position (Figure 1)
4. Push or pull the foot section a little until it
locks into place
5. Make sure both sides are securely locked
2.
Applying the Stretcher
To separate the stretcher halves, use thumbs to
press the Twin Safety Lock levers on each end
coupling and pull the coupling halves away from
each other.
Twin Safety Lock Levers
