FERNO/MAN/0721/220-R2/UK
18
7 - MAINTENANCE
Maintenance
INSPECTION CHECKLIST
TICK
●
Are all components present?
________________________________________________________________________
●
Is the trolley and UNI-ClipDoc generally free of excessive wear?
____________________________________________
●
Are all screws, nuts, bolts and rivets securely in place?
___________________________________________________
●
Do all moving parts operate smoothly and properly?
____________________________________________________
●
Does the trolley raise and lower properly into position with UNI-ClipDoc attached?
___________________________
●
Does the trolley move smoothly?
____________________________________________________________________
●
Do the wheel castors and brake operate properly, rotate fully and have adequate tread?
_______________________
●
For powered trolleys check that the battery is fitted to the trolley and that it is fully charged
at the beginning of each shift
______________________________________________________________________
●
Press the button located on the battery and check the red LED’s light up test the battery and ensure it is ready to use.
●
Confirm the operation of the trolley by using the up/down control buttons on the foot-end main frame.
__________
●
Check that the trolley cotsides raise, lower and lock in position.
____________________________________________
●
Check that the ambulance has a properly installed, approved locking device and that the trolley locks in securely.
__
●
Check the operation of the push/pull handles and push poles
_____________________________________________
7.6 - Inspecting the Trolley and UNI-ClipDoc before use
To ensure consistently safe operation of the trolley and UNI-ClipDoc interface and to monitor wear and tear, prior to each use, ensure the
trolley is thoroughly checked in compliance with the following checklist.