Ferplast HY1001 Instruction Manual Download

Page: 5 / 16

◇

Push the DOWN button and the table will lower.

◇

Loose the DOWN button and the table will stop.

NOTE

◇

The table is equipped with an aluminum guard to avoid accidental

danger.

◇

If aluminum guard strikes an object while the table lowers, stop

operation and check the lift table. After making sure no any abnormality,

strike the UP button slightly and then the electric system will function as

before.

◇

Emergency stop

◇

There are two methods of emergency stop as follows.

◇

Push down the emergency stop switch and the movement of table

stops.

◇

Strike aluminum guard upward and the movement of table also stops.

■

Transportation

If necessary, the lift table can be transported with attached ringbolts.

◇

Pay attention to the maximum capacity of lifting equipment to be used.

◇

Keep the ringbolts with reasonableness.

Summary of Contents for HY1001

















Search results

Summary of Contents for HY1001

Reviews:

Related manuals for HY1001

Brands by name

Popular brands

Ferplast HY1001, Instruction Manual

Search results

Summary of Contents for HY1001

Reviews:

Related manuals for HY1001

Brands by name

Popular brands