Line In / Aux In Connection
The Cavallino GT1 also offers the ability to allow other portable audio devices such as iPod shuffle, MP3, MiniDisc and
Portable CD Players to be connected for use as a speaker system via the Aux In input.
The AUX IN socket accepts a 3.5mm stereo cable plug.
1.
Using the appropriate stereo cable, connect your audio device to the AUX IN input.
Note: A device must be plugged into the AUX IN connector in order to select the AUX source.
2.
Select the AUX source by pressing the ‘Power/Pairing’ button on the GT1 or the by the ‘source button’ on the
remote control, Source Indicator will illuminate GREEN.
3.
Turn on the audio device connected and press play on your device.
4.
Set the volume of the device connected to 50% volume.
5.
Use the Up/Down volume controls on the Cavallino GT1 / remote control to adjust to the correct listening
volume.
Note: The Cavallino GT1 remote control will not control devices connected to AUX IN.
Charging your device with USB port
The USB port at the bottom of the Cavallino GT1 provides a 5V 2.1A power output via a USB type ‘A’
Note: The USB can only provide a maximum power of 5v 2.1A, do not exceed this voltage or current as it may
cause damage to your Cavallino GT1 or device.
