![background image](http://html.mh-extra.com/html/ferrari/f430-spider/f430-spider_owners-manual_554663096.webp)
96
The spare wheel is not fi tted with a tyre
pressure monitoring sensor (see label on
spare wheel bag). Hence, after fi tting, the
wheel is not monitored by the system,
however, it complies with International
Regulation
ECE R64/01
. Once fi tted,
we recommend you go to the nearest
Authorised Ferrari Service Centre.
After removing the spare wheel
support, put the tools and the
replaced wheel back into the luggage
compartment.
For headlamp beam aiming, contact the
Ferrari Service Network
.
Replacing the front direction indicator and
position light bulb
To access the headlight bulbs, turn the
wheels completely to the inside and remove
the inspection lid positioned on the front
part of the wheelhouse.
• Disconnect the battery using the battery
master switch (see
page 113
).
Replacing a bulb
Front lights
Low beam/high beam
Position light
Front direction indicator
Side direction indicator
�
�
�
�
Before replacing a bulb, always disconnect
the battery (see
page 113
) and check that the
corresponding fuse is intact.
When reconnecting the battery, follow the
procedure described on
page 113
.
Low beams/high beams
The low/high beams have high-voltage bi-
xenon light bulbs.
These bulbs have a high voltage power supply.
Avoid any operation with the ignition key in
position
II
.
For replacement, contact the
Ferrari Service
Network
.
Summary of Contents for F430 SPIDER
