Cod 96848
28
playing fields or on farms or in the forest.
Non-permitted users:
Persons who are not familiar with the operating manual, children, young people under the age
of 16
as well as persons under the influence of alcohol, drugs or medication must not operate the unit.
Working hours for gasoline brush cutter
While it is permitted to use a brush cutter at any time, operators should always show due
consideration to others living nearby.
ASSEMBLY
When assembling this machine, please follow the instructions for assembly steps.
1. Assemble the handle on the machine. First release the inner hex screws, second take
underside handle on the shaft, last assemble the upper side handle tighten the inner screws
enough.
2. Assemble the safe guard. Release hex screws on safe guard fixed base, and then fix the
safe guard with hex key and wrench enclosed as standard accessories for tightening the
nuts enough.
Warning!
Use only original manufacturer's replacement parts, accessories and attachments.
Failure to do so can cause poor performance, possible injury and may void your warranty.
Never use the machine without the guard assembled!
3. Assemble the cutting head.
3.1
Release the nut.
Line up the two holes of flange and shield, use one hex key to hold the
flange as below and turn the socket wrench clockwise, the nut will be released.
3.2
Fit the Nylon cutting head.
Remove another shield after release the nuts as picture
showing. Still hold the flange, take the Nylon cutting head on the shaft and rotate
counter-clockwise, the Nylon cutting head is fitted.
3.3
Release the Nylon cutting head.
Use screw driver to hold the flange and then rotate the
Nylon cutting head clockwise, it will be replaced.
Summary of Contents for 96848
Page 35: ...Cod 96848...
Page 36: ...Cod 96848 motore...
