Cod 96848
31
6. When the engine is running and idling, the throttle lever on handle.
First press the lock off lever and then switch the throttle lever on, the machine will be working.
7. If use Nylon cutter, before cutting, need to bump it to feed line firstly.
8. If any problem occurs, press the engine switch, the machine will stop running.
If you need stop cutting head working, release the throttle lever.
9. If the machine is hot, the throttle level can be adjusted to ON position directly when re-start the
machine.
10.
No person except operator allowed 15 meters radius danger zone. Eye, ear, face, foot, leg
and body protection must be worn by operator.
Persons in zone or risk beyond danger zone should wear eye protection against thrown
objects. Risk diminishes with distance from danger zone.
Note: Do not start the motor in tall grass
When the engine has been switched off, the cutter continues running for several seconds
therefore do not get close to the cutting head of the brush cutter until the cutter has come
to a standstill!
MAINTENANCE AND CARE
Before performing any maintenance or cleaning work, always turn off the engine.
1. Do not spray the unit with water. It may damage the engine.
2. Clean the unit with a cloth, hand brush, etc.
Maintenance schedule
12 hours of use 24hours of use
36hours of use
Air filter
clean
clean
replace
Spark plug
check
clean
replace
Expert inspection is required:
a) If the brush cutter strikes an object.
Summary of Contents for 96848
Page 35: ...Cod 96848...
Page 36: ...Cod 96848 motore...
