background image

 

 

 

ENGLISH 

1

 

Introduction 

In this booklet you will find installation instructions for your Power 

Distribution 8 enclosure. Please read the instructions carefully to 

ensure that no unnecessary errors occur. 

 

1.1

 

Included items 

The  following  articles  are  included  upon  delivery  of  a  Power 

Distribution 8 unit: 

Article 

Amount 

Distribution enclosure 

MCB  

Fuses (15A, 1000V, gPV) 

16 

Fuse holder 

16 

Cable glands  

10 

Cable glands covers  

10 

Key 

Warning sticker (En/Swe) 

1/1 

 

1.2

 

Warnings and recommendations 

RECOMMENDATION! 

Read through the manual before installation. 

RECOMMENDATION!

  Only  use  this  product  according  to  the 

instructions supplied to avoid any danger. 

WARNING!

 

The  electrical  installations  shall  be  conducted  by 

authorized  personnel  and  in  accordance  with  local  and  national 

electrical standards and safety measures. 

WARNING!

 You are not allowed to connect units to the DC nanogrid 

when it is energized. 

WARNING!

 

Risk of electrical shock/arc if the product is not used 

according to the instructions in the manual.  

WARNING!

 Do not use  the product if you suspect the product is 

damaged. Let it be inspected by qualified personnel before use.  

WARNING!

 

Do  not  use  the  product  if  the  housing  has  been 

tampered  with  or  not  intact,  for  example  during  repair,  do  not 

touch exposed parts. 

NOTE!

  The  warranty  does  not  apply  if  the  product  has  been 

modified, tampered with, or not installed in accordance with this 

manual. 

 

 

 

 

1.3

 

Explanation of safety notices 

 

 

 

 

1.4

 

Dimensions 

All dimensions are in mm if nothing else is specified.  

 

 

The flash symbol in an equilateral triangle warns 
of dangerous voltage.

 

 

The exclamation mark in an equilateral triangle is 
intended to warn the user that negligence of this 
information can be life threatening!

 

 

 

 

The  exclamation  mark  in  a  circle  is  intended  to 
inform  the  user  that  neglect  of  this  information 

may  be  associated  with  bodily  injury  and  /  or 

damage to the product. 

 

 

Summary of Contents for Power Distribution 8













Reviews: