31
A32 DANTE interfaces – USB and MIDI
USB
The USB port can be used to remote control the A32 DANTE. When
connecting to the PC, the A32 DANTE will appear as a USB-MIDI device.
Also, USB will be used to flash new firmware to the A32 DANTE. Please
visit our website to check for a new firmware version.
MIDI
It’s also possible to use the MIDI input and MIDI output ports for remote
control.
An advantage of the MIDI connection is the galvanic isolation, because
the MIDI input has an optocoupler. Also, it’s easy to daisy chain multiple
A32 DANTE using MIDI to remote control more than one unit at the
same time.
Another feature is that MIDI data from the MIDI port can be embedded
into the MADI stream and vice versa. Use the MIDI screen to configure
the routing of the MIDI data.