20
A32pro Series Manual: Technical Specifications / CE Conformity
Internal
wordclock
Temperature compensated oscillator (TCXO) with high accuracy.
Initial ac/- 1.5ppm
Course during temperature range: +/- 2.5ppm
Aging: +/- 1ppm
Voltage supply
12V at maximum 3A. 2 x sockets for 2.54mm hollow plug with securing nut for optional redundant power supply.
Input voltage monitoring selectable, warning message and/or GP output in case of failure of a voltage source.
Fuse
Polyfuse, internal, self-resetting
Power supply
12V, 3A, center pin positive , 01x PSU included
Power requirement
24VA nominal, less then 1VA in standby mode.
Temperature range
+5° to +45° Celcius - +41° to +113° Fahrenheit
Humidity
< 75%, non-condensing.
Weight
3,5kg - 7,71 lbs.
Dimensions
Net size: 25.3cm x 44.4cm (19") x 4.4cm (1U) (D x W x H)
Gross size: 29cm x 48.3cm x 4.4cm (1RU) (D x W x H) (including connectors, rack ears and knobs)
EMV
This unit has been tested by a test laboratory and complies with the standards for the harmonization of the laws of the member states
relating to electromagnetic compatibility (EMC Directive 2014/30/EU) as well as DIN EN 55103-1 (EMC interference emission) and
DIN EN 55103-2 (EMC interference immunity).
RoHs II
Each appliance has been soldered lead-free and complies with the requirements of the EU Directive 2011/65/EU and the limit values defined
therein for hazardous substances in electrical and electronic equipment. The documents on which this declaration is based are held by the
manufacturer and can be viewed there at any time. Unauthorized modification of this product invalidates the validity of this CE declaration!
FCC declaration
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) The unit may not cause any interference, and
(2) The unit may be immune to any interference received, including interference that may cause undesired operation.
CE Conformity
