Operation
The PULSE16 DX can be operated completely from the front panel by
using the SELECT pot and the MENU button. The POWER button can be
used as a “home button” and for switching the unit on and off. For
switching it off, keep the button pressed for over 3 seconds. When you
do, a countdown will be shown
on the screen to prevent acci-
dentally shutting down the unit.
You can control the PULSE16 DX
over the 5-pin MIDI Port or via
MIDI-over-MADI or from the RemoteFish App (available for PC and
Mac) over the Dante Ethernet cable. The main screen shows the levels
of all 16 analog inputs and outputs as well as important status
information. Press POWER to get back into this screen from every sub
menu.
The status bar below the level I/O’s show:
•
Wordclock sync source and sample frequency
•
MADI I/O: grey = no connection, yellow = signal detected,
green = locked on sample frequency
•
Status of the ADAT inputs 1-4. Same color coding like MADI.
•
Status of the Dante Port
•
BNC Wordclock Input
•
MIDI input indicator
•
MIDI-over-MADI I/O
•
Active preset number
