1. Description of the product
·
1.1. Door’s operating mode and Frame
The Aluminium rolling-up door is a vertical high-speed door with a top-mounted mechanism.
Lateral frames are used to drive the flexible blade. This blade is vertically opened and rolled up
on the superior part. The rolling axis roll-up the door thanks to the motoreductor.
For the closure, the blade goes down thanks to the weight on the inferior part,
guarantying the air-tightness.
·
1.1.1. Description
The door is composed by two lateral frames, a PVC blade as well as a rolling axis.
The door goes up and down thanks to the traction done by a motor allowing the movement.
The power of this last is done on an axis allowing to instantaneously vary the operating way.
On the inferior part of the blade there is a contactor safety allowing to invert its way as soon
as the minimum chock is detected; therefore to open the door by security. More over, on
the inferior part of the door, there is a security photocell to open the door if there is any
obstacle.
·
1.1.2. Electrical Control Box
The electrical control box is our Ref. MATRIX 6. This control box has been designed to be
used with motors supplied by the manufacturer which included mechanical limit switch. Its
corresponding instruction manual is supplied together with this assembly and Instruction
manual. Homologated according to UNE EN 12453 rule.
·
Technical Data
For all MATRIX 6 boards.
For motor up to 3,0 KW.
Supply voltage: 3x230V/PE;
3x400V/PE. Control Voltage: 24 VDC.
Dimensions: 220 x 305 x 140 mm. IP56.
For bad weather or continuous water spray uses, we recommend the additional protector
cover.
Electronic board protected by a cover.
Pattern and fixing elements supplied.
Box with integrated push buttons (OPEN-CLOSE-EMERGENCY STOP-VOLTAGE LUMINOUS
INDICATOR).
Entry with corrugated pipe coupling elements.
6
