DIVA D F
45
EN
cod. 3542A640 - Rev. 00 - 11/2022
Press the
reset
button again (detail 6 - fig. 1) for 5 seconds to exit the "Sliding Temperature" menu.
If the room temperature is lower than the desired value, it is advisable to set a higher order curve and vice versa. Pro-
ceed by increasing or decreasing in steps of one and check the result in the room.
fig. 6 - Compensation curves
fig. 7 - Example of compensation parallel curve offset
Adjustments from Remote Timer Control
A
If the boiler is connected to the Remote Timer Control (optional), the previously described adjustments are
managed as described in table 1.
Table 1
Heating temperature adjustment
Adjustment can be made from the Remote Timer Control menu and the boiler control panel.
DHW temperature adjustment
Adjustment can be made from the Remote Timer Control menu and the boiler control panel.
Summer/Winter Switchover
Summer mode has priority over a possible Remote Timer Control heating request.
Eco/Comfort selection
Disabling DHW from the Remote Timer Control menu forces Economy mode. In this condition,
with the
off
button (detail 7 - fig. 1) on the boiler panel, it cannot be switched to Comfort mode.
By enabling DHW from the Remote Timer Control menu, the boiler selects Comfort mode. In
this condition, with the
off
button (detail 7 - fig. 1) on the boiler panel, one of the two modes
(Economy - Comfort) can be selected.
Sliding Temperature
Both the Remote Timer Control and the boiler card manage the Sliding Temperature adjust-
ment: between the two, the Sliding Temperature of the boiler card has priority.
20
30
40
50
60
70
80
90
85
20
10
0
-10
-20
1
2
3
4
5
6
8
9
10
7
20
30
40
50
60
70
80
90
85
20
30
40
50
60
70
80
90
85
1
2
3
4
5
6
8
9
10
7
1
2
3
4
5
6
8
9
10
7
OFFSET = 20
OFFSET = 40
