DIVA D F
49
EN
cod. 3542A640 - Rev. 00 - 11/2022
Accessing the electrical terminal block
The electrical terminal block can be accessed after removing the casing. The arrangement of terminals for the various
connections is also given in the wiring diagram in fig. 29.
fig. 10- Accessing the terminal block
2.6 Fume ducts
Important
The unit is a "C type" with sealed chamber and forced draught, the air inlet and fume outlet must be connected to one
of the following extraction/suction systems. The unit is approved for operation with all the
Cny
flue configurations given
on the dataplate. Some configurations may be expressly limited or not permitted by law, standards or local regulations.
Before installation, check and carefully follow the instructions. Also, comply with the instructions on the positioning of
wall and/or roof terminals and the minimum distances from windows, walls, ventilation openings, etc.
72
139
138
3
4
