DIVA D F
61
EN
cod. 3542A640 - Rev. 00 - 11/2022
Notes:
1. Parameters with more than one description vary their function and/or range in relation to the setting of the parameter
given in brackets.
2. Parameters with more than one description are reset to the default value if the parameter given in brackets is mo-
dified.
3. The Maximum Heating Power parameter can also be modified in Test Mode.
Press the Reset button to return to the Service Menu. Press the Reset button for 20 seconds to exit the card Service
Menu, or exiting occurs automatically after 15 minutes.
“In” - Information Menu
PAR_INFO
pieces of information are available.
Press the Heating buttons to scroll the list of information in increasing or decreasing order. Press the DHW buttons to
display the value.
Table 11
Notes:
1. In case of damaged sensor, the card displays hyphens.
Press the Reset button to return to the Service Menu. Press the Reset button for 20 seconds to exit the card Service
Menu or exiting occurs automatically after 15 minutes.
P19
Solar deactivation temperature (b02=1)
0÷20°C
10
Solar deactivation temperature (b02=2)
0÷20°C
No effect on adjustment (b02=3)
--
No effect on adjustment (b02=4)
--
P20
Solar ignition temperature (b02=1)
0÷20°C
10
Solar ignition temperature (b02=2)
0÷20°C
No effect on adjustment (b02=3)
--
No effect on adjustment (b02=4)
--
P21
Solar standby time (b02=1)
0-20 seconds
10
Solar standby time (b02=2)
0-20 seconds
No effect on adjustment (b02=3)
--
No effect on adjustment (b02=4)
--
Contents
Description
Range
t01
NTC Heating sensor (°C)
between 05 and 125°C
t02
NTC Safety sensor (°C)
between 05 and 125°C
t03
NTC DHW sensor (°C)
between 05 and 125°C
t04
NTC External sensor (°C)
between -30 and 70°C (negative values flash)Without NTC = --
L05
Actual burner power (%)
00%=Min., 100%=Max.
F06
Actual Flame resistance (kOhm)
00-99 kOhm (-- = burner off)
St07
Fan step (Number)
0=Off, 1=Min, 2=Med, 3=Max
F08
Actual DHW drawing (L min/10)
L min/10 over 99 flashing 3 figures
PP09
Actual modulating pump speed (%)
00-100% not working in this model
Index
Description
Range to use
DIVA D F