background image

Pegasus F2

22

Remember: to avoid unnecessary expense, before contacting Service Department, make sure that any

boiler failure is not due to the absence of electric power or gas supply.

Check that the boiler is perfectly clean.
Check that the boiler rating is in proportion to the system.

System water temperature is

Check the functioning of the regulating thermostat.

too high or too low

Check the pump is not blocked.
Make sure the pump characteristics are in proportion to
the size of the system.

Flare-ups at the burner

Check that the gas pressure is sufficient

Delayed ignition

and that the boiler body is not dirty.

Regulating thermostat restarts

Check that the bulb is properly inserted.

with too high a temperature

Replace the thermostat.

difference

Boiler forms condensate

Check that the boiler is not running at too low a tempera-
ture.
Check that gas consumption is normal. Make sure the
burner flame is well adjusted.

Boiler becomes dirty quickly

Check that the burner flame is adjusted properly and that
gas consumption is in proportion to the boiler power.

Boiler shuts off

Flue gas safety thermostat tripped.

for no apparent reason

Safety thermostat tripped after safe working temperature
has been exceeded.

Summary of Contents for PEGASUS F2 102

























Reviews: