14
ENGLISH
ENGLISH
ARRIVAL
Inspections on arrival
As soon as the appliance is consigned, it is essential to make sure that all the ordered items have been received and that the
shipment is complete. Carefully check to make sure that the equipment has not been damaged. If visible damage is discovered,
immediately inform the haulage contractor and write “
Collected with reserves owing to evident damage
” on the consignment
note. Delivery ex works means that, as established by law, reimbursement of any damages is at the insurance company’s char-
ge.
Safety regulations
Comply with the current safety regulations concerning the equipment to use when handling the unit or the required ways of ope-
rating.
Handling
Check the weight of the appliance before proceeding with the moving and handling operations. The weight is indicated on the
data plate with the general features of the appliance and in the
General Specifications
section of this manual. Make sure that
the appliance is handled with care and without jolting as rough treatment could damage the functional parts of the machine.
The pack containing the unit gives instructions about how to handle the machine correctly when it is stored and installed.
The unit is supplied on a pallet prepared for transporting in the frontal direction. It is advisable to place suitable material between
the truck and unit so as to prevent this latter from being damaged. Prevent the unit or parts of it from falling on to the ground.
WARNING:
To safeguard persons and property, read the information on the packing that covers the unit before handling. Also make sure to:
• Handle the machine with care
• Do not stack other objects on top of the unit
Storage
The units must be stored in a dry place, sheltered from the sun, rain, sand and wind.
Comply with the storage conditions given below:
• Do not stack the units
• Maximum temperature = 60°C
• Minimum temperature = -10°C
• Humidity = 90%
Storage Module
30
33
55
MU
Transport weight
39
43
54
kg
Unit
16
19
24
30
30/3
38
38/3
42
50
MU
Transport weight
70
80
84
92
105
122
123
kg
Remember that the heaviest part is the one where the compressor is installed (electric panel side), which also cor-
responds to the unit’s center of gravity position.
!