9
ACCESSORIES AND OPTIONAL EQUIPMENT
ENGLISH
ENGLISH
Accessory for the Storage and Pumping Module
Storage and Pumping Module Accessory
Mechanical options
Special finned heat exchangers
•
Coils with copper fins
•
Coils with tin-coated copper fins
•
Coils with aluminium fins with acrylic coating
Electrical options
Power supply voltage rating
-230V-3-50Hz (only for mod.30-38-42-50)
Electrical Accessories
CR - Remote Control
This device allows all the control and monitoring functions of the control unit on the machine to be controlled up to 100 meters
away from the actual machine itself. Use a three-pole or three-wired section cable in PVC type N07-VK with a 1 mm
2
wire sec-
tion for the connections. The transmission line must be routed in a dedicated duct, separate from any electric powering lines
(230/400 V).
The remote control has the following keys:
1 - MODE key :
selects the operating mode
2 - ON/OFF key :
turns the unit ON/OFF and resets the alarms
3 - Mode + ON/OFF keys :
used to access and quit the various menu levels
4 - UP key :
scrolls forwards through the menu items or increases the value of a parameter
5 - DOWN key :
scrolls backwards through the menu items or decreases the value of a para-
meter
RAG: Antifreeze heater Storage Tank
(accessory used in conjunction with the Storage
and Pumping Module)
Glow plug type; maintains the water in the storage tank at a temperature able to prevent ice from forming during winter stand-
stills. (250W/230V-1/50Hz).
OP - Programmer Clock
This is a device (housed in a modular casing 45 mm in width) that allows the unit to be turned on and off (without needing to be
regulated) by means of the remote controlled digital on-off input on the control board of the unit. Up to 14 settings can be ente-
red, divided as required throughout the 7 days of the week. The clock is connected to the machine with 4 wires of the PVC N07-
VK type with a 1.5 mm2 section. Take care to route the cable since the wires are live (230V mains voltage).
Combinations of accessories-models
Unit without Pumping and Storage Module
STORAGE MODEL
CODE
30
33
55
Antifreeze heating element
RAG 5
•
•
•
MODEL OF UNIT
CODE
16
19
24
30
30/3
38
38/3
42
50
ACCESSORIES
MECHANICAL
Hydraulic quick couplings
AV4
•
•
•
•
•
•
•
Flexible wet connections
KT14
•
•
•
•
•
•
•
Protective coil grilles.
GP18
•
•
GP19
•
•
GP20
•
•
•
Bracketing kit for Unit +
Pumping and Storage module
ST1
•
•
•
•
•
•
•
Rubber vibration dampers
AVG6
•
•
•
•
•
•
•
ELECTRIC
Remote Control
CR
•
•
•
•
•
•
•
Programmer Clock
OP
•
•
•
•
•
•
•
STORAGE MODEL
CODE
30
33
55
MATCHABLE UNIT MODEL
16
19
24
30
30/3
38
38/3
42
50
Standard version.
SAA 8
•
SAA 10
•
SAA 12
•
High Head Version
SAA 9
•
SAA 11
•
