6
7
FD630B
FD630B
Crimping Press
Crimping Press
FD630B
FD630B
•
Use the FD630B for recommended uses only, any deviation
may lead to personal injury or property damage.
•
Wear ANSI-approved safety goggles and heavy duty work
gloves during use.
•
Maintain a clean and well lit work space.
•
Keep bystanders clear of your work space during assembly
and operation.
•
Maintain proper footing and balance at all times, ensuring
better control while crimping lugs and terminals.
•
Keep hands and fingers away from the crimping head, the
FD630B creates approximately 35 Tons.
•
Do not operate when tired or under the influence of
intoxicants.
•
NEVER attempt to crimp wires that are plugged into an outlet
and are electrically charged.
•
Refer to the wire manufacturer’s instruction manual for specific
crimping information prior to using this product.
•
Maintain the product labels and name plates, If they are
missing or unreadable contact Ferrules direct.
•
This product is not a toy. Do not allow children with or near the
•
Use for intended purpose(s) only.
•
Check that all parts are properly functioning and tightened
every month, do not operate if anything is missing or
damaged.
•
Lubricate moving parts roughly every 10,000 crimping cycles
by adding Premium ISO (VG) 32 Anti-Wear Oil.
•
When storing the FD630B, cover the hydraulic port to prevent
debris from collecting.
•
store the press in a dry, cool place and cover it with a suitable
covering to avoid dust and potential rust, depending on the
operating conditions.
•
Do not operate the FD630B in high temperature or humidity
(recommended operating conditions: 40°F to 120°F).
•
If you require replacement parts, check out website:
Service Condition and Notes
Operating Information
