MACHINES AND
ACCESSORIES
Page 13 of 69
Al
l r
ig
ht
s
ar
e
re
se
rv
ed
o
f r
ep
rod
uct
io
n
an
d
di
ss
em
in
at
ion
of
th
is
T
ec
hn
ic
al
M
anu
al
a
nd
d
ocu
m
ent
ati
on
ci
te
d
an
d/
or
a
tt
ach
ed
. I
t i
s
ex
pr
es
sl
y
for
bi
dd
en
to
re
pr
od
uce
, p
ub
lis
h
or
d
is
tr
ib
ut
e
an
y
in
for
m
ati
on
fr
om
th
is
M
an
ua
l.
Cop
yr
ig
ht
b
y
FE
RV
I
4
DESCRIPTION OF THE MACHINE
The
Bench lathe Art. 0657
is a machine tool, with a horizontal axis, for the machining of
metallic materials by means of cold chip removal.
The machine is completely
manually operated
, as it can only execute movements under the
direct control of the operator.
4.1
Intended use and field of application
The machine is designed and constructed primarily for the following work processes:
1.
Traditional turning
: cylindrical turning, facing, drilling and boring, threading, etc.
In this case, the cutting motion is given by the motion of the workpiece, rotating on its
own axis, and the feed motion of the tool.
2.
Milling.
In this case, the cutting motion is given by the motion of the tool (milling cutter),
rotating on its own axis, and the feed motion of the workpiece mounted on the
appropriate fastening device supplied.
Intended use and materials
The machine has been designed and manufactured for the uses specified.
Any use and lack of respect for the technical parameters established by the manufacturer may
be dangerous to operators; therefore, the manufacturer cannot assume any liability for
resulting damages.
The lathe is equipped with a support base and must be installed and used on flat surfaces,
with ergonomic features and adequate resistance. Furthermore, sufficient space should be left
around the machine to ensure proper maintenance and cleaning of all parts of the machine
can be carried out.
The lathe can operate in enclosed working environments (production departments,
warehouses, etc.), i.e. those that are protected from the weather and where there is no
danger of fire or explosion.
The operating temperature is within the range of +5 / +50°C.
The environment must also be sufficiently illuminated so as to ensure operation in maximum
safety (at least 50 lux is recommended).
The Lathe consists of two basic units:
the spindle;
tool holder slide assembly (carriage)
The first is constituted by the spindle and by the components that transmit motion from the
motor to the spindle.
The second is constituted by the tool holder carriage and the parts that transmit motion to
the tool holder carriage during the automatic feed motion.
fervi.com
