HARDWARE
Page 12 of 16
Workspace
Be familiar with the work area.
Always check the work area before using the ratchet wrench.
Keep the work area clean, uncluttered and well lit.
After assembling the socket and connecting the flexible compressed air supply hose, grab the
impact wrench by its "gun" handle.
To adjust the direction of rotation of the wrench it it necessary to push the pin located at the
front (Figure 5 / A), the pressure on this side causes the exiting of the pin from the back
which allows the rotation direction to be inverted (figure 5/B).
F
(FORWARD)
→
Rotate clockwise to TIGHTEN/SCREW
R
(REVERSE)
→
Rotate anticlockwise to LOOSEN/UNSCREW
Figure 5 – Adjusting the rotation direction.
Rotate the speed adjustment knob of the wrench (and
the maximum torque) to the desired position, 9
different positions are possible (Figure 6).
“1”
→
minimum speed
“9”
→
maximum speed
Figure 6 – Speed adjustment.
To turn on the wrench and begin the rotation of the socket, press the "trigger" lever on the
butterfly valve (Ref. 4 in Figures 2 and 7).
A
B
fervi.com
