HARDWARE
Page 13 of 16
The impact wrench's start lever is a continuous hold lever, in
the sense that the function controlled (i.e., the rotation of the
accessory) is active as long as the lever itself is kept pressed.
Therefore, release the lever to shut it down in an emergency.
Figure 7 – Starting the tool
The impact wrench's start lever is a continuous hold lever, in the sense that the function
controlled (i.e., the rotation of the accessory) is active as long as the lever itself is kept
pressed.
Therefore, release the lever to shut it down in an emergency.
Emergency
In case of an emergency, immediately release the ratchet wrench's power lever.
Disconnect the air hose and turn off the tool in the event of the following:
to change out or substitute the sockets and/or extensions;
to clean, rebuild or perform maintenance on the ratchet wrench;
if the ratchet wrench will not used for some time.
fervi.com