Festina F16525, Instruction Manual

IFM0S62

IFM0S62

18

19

ENGLISH

CHRONOGRAPH RESET (Inc. after replacing battery)

By  virtue  of  the  regulations  pursuant  to  the  handling  of  waste 
products  deriving  from  electronic  and  electrical  equipment,  end  of 
lifecycle  watch  making  products  must  be  selectively  collected  for 

processing. You may therefore dispose of your quartz watch making products at 
any of our retail outlets or any other authorized collection point. The selective 
collection, processing, rating and recycling of these products helps contribute to 
safeguarding the environment and protecting our health.  

This  procedure  should  be  perfomed  when  the  chronograph  second  hand  and 
chronograph 1/20 (1/1) second hand do not return to the ZERO second position after 
the chronograph has been reset, and including after the battery has been replaced.

1. 

Pull the crown out to the 2nd Click Position.

2. 

Press button “A” to set the chronograph second hand to the ZERO position.

3. 

Press button “B” to set the chronograph 1/20 second hand to ZERO position. 
The chronograph hands can be advanced rapidly by continuously pressing button 
“A” or “B”.

4. 

Once the hands have been zeroed, reset the time and return the crown to its 
normal position.

5. 

Press button “B” to check that the chronograph hands are reset to the ZERO 
position.

* 

 Do not return crown to the normal position while chronograph second hand and 
1/20 chronograph second hand return to ZERO position.

Each hands stop on the way when crown are returned to normal position and   t h e s e 
positions are recognized as ZERO position.

CHRONOGRAPH RESET (Inc. after replacing battery)