DAPZ−...−AR
Festo DAPZ−...−AR 0512a English
35
Fitting the visual display
Please note
The following conditions must be fulfilled when the visual display is fitted:
the 2/2−way valve must be closed
the 3/2−way valve can be in any switching position.
Fitting the red/green rings
S
Check the relative position of the red ring
1
and the green ring
2
to each
other.
S
If necesary, turn the red ring in the guide of the green ring until the lower
edges of the red ring and the green ring are flush with each other.
Fig.23
Fig.24
1
2
S
Align the internal double surface of
the red ring with the double surface of
the cam shaft.
S
Push the four steps of the green ring
into the guides on the housing of the
DAPZ−...−AR.
S
Carefully turn the red ring backwards
and forwards until it can be pushed
onto the cam shaft.
Make sure that the steps of the green
ring remain in the guides.
Fig.25
Summary of Contents for 534474
Page 111: ...DAPZ AR Festo DAPZ AR 0512a 111 ...
