Introduction
10
© Festo Didactic CP Factory / CP Lab ° application module drilling
2
Introduction
2.1
Warranty and liability
In principle all our „Terms and Conditions of Sale“ apply. These are available to the operating authority
upon conclusion of the contract at the latest. Warranty and liability claims for persons or material damage
are excluded if these can be traced back to one or several of the following causes:
Use of the system not in accordance with its intended purpose
Incorrect assembly, commissioning, operation and maintenance of the system
Operation of the system using faulty safety equipment or incorrectly fitted or non-operational safety or
protective devices
Non observance of notes in the manual regarding transport, storage, assembly, commissioning,
operation, maintenance and setting up of the system
Unlawful constructional modifications on the system
Inadequate monitoring of components subject to wear
Incorrectly carried out repairs
Catastrophes as a result of foreign bodies and vis major.
Festo Didactic herewith rules out any liability for damage or injury to trainees, the training company and/or
other third parties which may occur during the use/operation of the system other than purely in a training
situation, unless such damage has been caused intentionally or due to gross negligence by Festo Didactic.
2.2
Important notes
The basic requirement for safe use and trouble-free operation of the system is to observe the fundamental
safety recommendations and regulations.
This manual contains important notes concerning the safe operation of the system.
The safety recommendations in particular must be observed by anyone working on the system.
Furthermore, the rules and regulations for the prevention of accidents applicable to the place of use must be
observed.