![background image](http://html1.mh-extra.com/html/festo/cp-lab/cp-lab_manual_2282519022.webp)
Start up
22
© Festo Didactic CP Factory / CP Lab ° application module drilling
5.2.2
Pneumatic port of application module
Pneumatic port is done on the principle of the following sketch. The application module is connected from
the valve terminal to the on-off valve at the conveyor. You only have to plug the tube (nominal size 4) into
the QS plug.
Pneumatic connection of the application module
5.2.3
Electrical connection of application modules
See design and Function