SDE1−...
Festo SDE1−... 0511e English
50
S
Complete the following steps:
Setting the switching functions
SDE1−...−C
SDE1−...−L
1. In order to activate the EDIT mode, press the EDIT button.
Only with active security blocking [lock] flashes:
S
Press the UP/DOWN button until the desired security code is set.
S
Press the EDIT button.
[Out A] flashes.
You can now use the UP/DOWN button to select the following (see also Fig.23):
With two switching outputs: the output for which the behaviour is to be set
Units bar ([kPA], [psi], [bar]) for setting the unit of measurement and the security
code [lock]
With two switching outputs:
S
If you wish to set Out B, press the B−button (DOWN) ([Out B] now flashes).
2. In order to confirm the selected output, press the EDIT button.
The currently set switching function now flashes.
3. Select desired switching function (threshold value/window comparator) with the
UP/DOWN button.
4. In order to confirm, press the EDIT button.
[SP] or [SP] [
min
] flashes.
[SP] or [SP.L] is shown briefly. Segment 5 flashes.
5. Set the switching point (SP or SP
min
) with the UP/DOWN button.
6. In order to confirm, press the EDIT button.
With window comparator"
switching function: [SP] [
max
]
flashes
With window comparator" switching function:
[SP.H] is shown briefly. Segment 8 flashes.
7. Set the value (SP
max
) with the UP/DOWN button.
8. In order to confirm, press the EDIT button.
[HY] flashes.
[HY] is shown briefly. 3 segments flash.
9. Set the hysteresis (HY) with the UP/DOWN button.
10. In order to confirm, press the EDIT button.
[NO] or [NC] flashes.
11. Set the switching characteristic [NO/NC] with the UP/DOWN button.
12. In order to confirm, press the EDIT button.
The SDE1−... is then in the RUN mode again.
Summary of Contents for SDE1 Series
