VPPM−...−DE/E N
Festo VPPM−... 0810b English
31
Fastening to a wall or surface
S
Fasten the VPPM−... at the intended
position with two M4 screws.
If necessary, use the bracket type
VAME−P1−A (see Fig.). When mounting
the VPPM with the aid of the bracket,
the VPPM−... may only be loaded
statically.
Position of the mounting holes, see Fig.
Tightening torque: 1.0 Nm
Fastening on the sub−base
S
Fasten the VPPM−...
2
on the
sub−base
1
type VABM−P1−SF−G18−...
Position of the mounting holes,
see Item
3
in the figure to the right
Tightening torque: 1.5 Nm
1
2
3
Fastening on the H−rail (see Fig.9)
S
Mount the H−rail adapter type VAME−P1−T to the VPPM−... with the aid of the enclosed
screws (Tightening torque approx. 1.0 Nm):
for
x
": M4 x 65
for
¼
": M4 x 75
S
Hang the VPPM−... onto the H−rail.
S
Secure the VPPM−... with the retaining screws of the H−rail adapter
(tightening torque 1.5 Nm).
Fig.8
