Festo — VTSA-F-CB — 2021-06a
Product overview
27
The vacuum generator VABF is used to generate vacuum. Workpieces can be gripped and transported
with the vacuum generated and a suction gripper.
Further information
è
Operating instructions VABF-S4-...-CB-VH/VL-....
4.1.1.13 Separating seals for pressure zone formation
Fig. 16: Separating seal between manifold sub-bases
Pressure zones can be formed in the valve terminal to supply valves with different pressures. The
pressure zones are defined by separating seals between the manifold sub-bases.
The separate ducts are marked on the separating seals. If the separating seals are pre-assembled at
the factory, the separate ducts are also marked on the manifold sub-bases:
Separating seal
Identification
Separate ducts
Separating seal
Manifold sub-base
–
–
Supply duct (1)
Supply duct (1)
Exhaust ducts (3) and
(5)
