11
Service
The descent rate during operation of the manual exhausting is dependent on the customer-specific
application.
Before the commencement of maintenance and cleaning work:
1. Slowly lower the balancer with the aid of manual exhausting on the valve unit VPCB into a safe
position or secure it from falling using suitable measures.
2. Exhaust system parts with stored compressed air.
3. Switch off the operating voltage and secure it against being switched on again.
4. Carry out maintenance work on the installed individual components in accordance with the relev-
ant documentation
è
11.1
Cleaning
Clean the outside of the product with a soft cloth. Do not use aggressive cleaning agents.
12
Malfunctions
The display and elimination of malfunctions are dependent on the customer-specific application.
–
During operation, observe the associated documentation for the individual components installed
è
12.1
Repair
In the event of repair, contact the Festo repair service
è
13
Disassembly
The descent rate during operation of the manual exhausting is dependent on the customer-specific
application.
Before the commencement of disassembly work:
1. Slowly lower the balancer with the aid of manual exhausting on the valve unit VPCB into a safe
position or secure it from falling using suitable measures.
2. Exhaust system parts with stored compressed air.
3. Switch off the operating voltage and secure it against being switched on again.
4. During disassembly, observe the associated documentation for the individual components
installed
è
Service
18
Festo — YHBP-1 — 2018-11
