Festo — YXCF — 2021-07b
Assembly
25
EHMX-ELGC-
60
80
X1
2)
[mm]
Hx – 1.5
Hx – 13.5
X2
3)
[mm]
(X1 – X3)/(n – 1)
X3
[mm]
68
G1
M5
Thread depth G1
[mm]
³
8
1) By = width in Y-direction
è
Technical data
2) Hx = stroke in X-direction
è
Technical data
3) n = number of mounting components per X-axis
Tab. 6: Dimensions for mounting kit for EHMX-ELGC
Dimension X1
1)
[mm]
Dimension Y1
1)
[mm]
£
1000
1001 … 2000
2001 … 3000
£
1000
0.1
0.2
0.3
1001 … 2000
0.2
0.4
0.6
2001 … 3000
0.3
0.6
0.9
3001 … 4000
0.4
0.8
1.2
4001 … 5000
0.5
1.0
1.5
1) The calculation of dimensions X1 and Y1 depends on the product version.
Tab. 7: Required flatness of the mounting surface for mounting kit
1. Determine the values of the dimensions X1 and Y1.
2. The required flatness of the mounting surface depends on the size of the product.
Check that the mounting surface has the required flatness in accordance with the derived values
for the dimensions X1 and Y1.
3. Prepare the mounting holes on the mounting surface in accordance with the product dimensions.
With EHMX-ELGC:
The supports of the energy chain and the mounting kits are mounted on the same slot of the
X-axis. If necessary: move the mounting kits and change the dimension X2 accordingly.
4. With EHMX-EGC-...-M, motor position centre:
Prepare the mounting for the motor
