Sanding work
Adjusting
wheel setting
–
Sanding with max. abrasion
–
Sanding off old paint
–
Sanding of wood and veneered
surface prior to paintwork
–
Intermediate sanding of paintwork
on surfaces
5 - 6
–
Sanding thinly applied undercoat
–
Sanding wood with sanding cloth
–
Edge breaking on wooden parts
–
Smoothing primed wooden surfa
ces
4 - 5
–
Sanding solid wood and veneered
edges
–
Sanding rebate of windows and
doors
–
Intermediate sanding of paintwork
at edges
–
Light sanding of natural wood win
dows using sanding cloth
–
Smoothing wooden surfaces using
sanding cloth before staining
–
Rubbing or removing excess lime
stone residue using sanding cloth
3 - 4
–
Intermediate sanding of paintwork
on stained surfaces
–
Cleaning natural wood window re
bate using sanding cloth
2 - 3
–
Sanding stained edges
–
Sanding of thermoplastics
1 - 2
7.2
Replacing the sanding pad [4a]
An optimal work result can only be ach
ieved using original accessories and con
sumables. The use of non-original accessories
or consumables invalidates the right to claim
under warranty.
Warning! Do not perform any structural
changes in the open interior space of the
machine when the sanding pad is dismantled.
Undo the four screws.
Remove the sanding pad by pulling it down
wards.
Attach the new sanding pad.
Use four screws to tighten it by hand
(2.5 Nm).
Hardness of the sanding pad
Adapted to the surface being processed, the
machine can be equipped with sanding pads of
different hardnesses.
Soft: Universal for coarse and fine sanding, for
flat and convex surfaces.
Extra-soft: Fine sanding of moulded parts,
arches, radii. Do not use on edges.
7.3
Attaching sanding accessories using
StickFix [4b]
The suitable StickFix sandpaper and StickFix
sanding cloth can be attached quickly and sim
ply to the StickFix sanding pad.
► Affix the self-adhesive sanding accessory to
the sanding pad.
In the case of a weakening adhesive ef
fect of the StickFix surface, the sanding
pad accessories, in particular those which are
not yet touching the workpiece, may come
loose from the sanding pad and cause injuries.
Replace the sanding pad!
7.4
Dust extraction
WARNING
Dust hazard
► Dust can be hazardous to health. Always
work with a dust extractor.
► Always read applicable national regula
tions before extracting hazardous dust.
Integral dust extractor with long-life dust bag
As standard, the sanders are equipped with an
integral dust extractor. The sanding dust is ex
tracted through extraction openings in the
sanding pad and is collected in the dust bag.
Installing the dust bag [5]
Slide the dust bag onto the machine until it
clicks into place.
If the suction power is decreasing, empty
the dust bag.
Press the dust bag onto the actuating ele
ments.
Remove the dust bag by moving it towards
the rear.
Open the flap on the dust bag.
Empty the dust bag and dispose of the waste.
English
16
