Festool 204875, Original Instructions Manual

10 Accessories

Refer to the Festool catalogue for the order 

numbers of accessories and tools or find them 

online at www.festool.co.uk.
In addition to the accessories described, 

Festool also provides a comprehensive range of 

system accessories that allow you to use your 

saw more effectively and in diverse applica­

tions, e.g.:
•

Parallel stop, extension table PA-HKC 55

•

Kickback stop FS-RSP

•

Parallel stop FS-PA and guide extension 

FS-PA-VL

•

Side-mounted cover, false joint ABSA-TS 

55

10.1 Saw blades, other accessories
In order to saw different materials quickly and 

cleanly, Festool offers saw blades for all appli­

cations and these are specially designed for 

your Festool saw.
10.2 Guide rail
The guide rail enables you to make clean, accu­

rate cuts while simultaneously protecting the 

surface of the workpiece from damage.
In conjunction with the extensive range of ac­

cessories, exact angled cuts, mitre cuts and fit­

ting work can be completed with the guide sys­

tem. The option of attaching the guide rail se­

curely using clamps [8-7] ensures safer work­

ing conditions.
► Adjust the guide play between the saw table 

and the guide rail using the two adjustable 

jaws [8-8].

Bed in the splinter guard before using the 

guide rail for the first time[8-5]:
► Position saw with the entire guide plate at 

the rear end of the guide rail.

► Swivel saw to 0° position and set maximum 

cutting depth.

► Switch on saw.

► Slowly drop the splinter guard across the 

entire length without setting down.

The edge of the splinter guard now corresponds 

exactly to the cutting edge.
10.3 Cross cutting guide rail
The cross cutting guide rail is designed for saw­

ing wood and panel materials.
It enables precise and clean cuts, in particular 

angled cuts can be performed simply and with 

repeat accuracy. The saw automatically moves 

back to the initial position after the sawing 

process.

Observe the instructions in the operating man­

ual for the FSK cross cutting guide rail

11 Environment

Do not dispose of the device in the 

household waste! Recycle devices, ac­

cessories and packaging. Observe appli­

cable national regulations.
EU only: In accordance with the European Di­

rective on waste electrical and electronic 

equipment and implementation in national law, 

used power tools must be collected separately 

and handed in for environmentally friendly re­

cycling.
Information on REACH: www.festool.com/reach

12 General information

12.1 Information on data privacy
The power tool contains a chip which automati­

cally stores machine and operating data. The 

data saved cannot be traced back directly to an 

individual.
The data can be read in a contactless manner 

using special devices and shall only be used by 

Festool for fault diagnosis, repair and warranty 

processing and for quality improvement or en­

hancement of the power tool. The data shall not 

be used in any other way without the express 

consent of the customer.

English

27