socket and one
consumer:
Combination
with a multiple
socket and sev
eral consumers:
PRCD protective
adapter [1-8] re
quired for the
second and each
additional con
sumer.
7
Operation
7.1
Checking the state of charge
► Open the Systainer lid with the T-
Loc [1-5].
► Deactivate transport mode: Set the
transport switch [1-13] to "I".
).
► Watch the LED indicator [1-9]
7.2
Charging
Only use the supplied charging ca
ble [1-11] for charging.
While the SYS‑PST 1500 Li HP is
charging, it cannot also be oper
ated using the AC output [1-3].
If the charging cable is connected
during operation, the AC out
put [1-3] is deactivated.
Observe the minimum required
charging power (see section
► Open the Systainer lid with the T-
Loc [1-5].
► Deactivate transport mode: Set the
transport switch [1-13] to "I".
► Close the Systainer lid with the T-
Loc [1-5].
► Connect the charging cable [1-11]
to the AC charging input [1-1] and
mains outlet.
Charging process: LEDs light up green
in sequence from left to right.
Charged: LEDs off.
7.3
Switching on/off
Switching on
► Press the on/off switch [1-7].
SYS‑PST 1500 Li HP powers up or starts
and the LEDs [1-9] light up in the start
sequence.
Switching off
► Press the on/off switch [1-7].
7.4
LED indicator
LEDs off
SYS‑PST 1500 Li HP switched off
or
completely discharged
or
English
21
Summary of Contents for 205721
