dled in accordance with the manufac
turer's instructions.
–
Wear suitable personal protective
equipment: Safety shoes.
– Only operate the machine within
the operating limits specified in the
technical data (see section
).
– Charge the machine at regular in
tervals to prevent hazards posed by
a deeply discharged battery.
– Do not tamper with the machine.
– Do not short-circuit the AC charging
input [1-1], AC output [1-3] and
DC output compatible with
USB‑C
TM
[1-6].
– Do not touch the AC charging in
put [1-1].
– Do not touch connections and elec
trical contacts with fingers, jewel
lery or other metal objects.
– Do not store or set up in potentially
explosive environments.
– Do not set up in standing water.
– Keep the protective cap on the AC
output [1-2] closed during charg
ing.
– Keep the Systainer lid [1-5] closed
during operation and storage.
– Avoid storage at high temperatures
(max. 45 °C). Keep the machine
away from external heat sources
(e.g. prolonged sunlight, fire).
– Do not clean with liquids (in partic
ular, do not use a pressure washer).
– Do not use chemicals, fuels and lu
bricants (e.g. for cleaning).
– This machine must not be used by
people who might have a particular
ly adverse reaction to an electric
shock (e.g. people with cardiac
pacemakers), because the possibili
ty of the machine and the connected
consumer building up a static
charge cannot be excluded.
– People with disabilities or impair
ments, as well as children, must
not operate this machine without
supervision.
– Do not operate at altitudes exceed
ing 2000 m above sea level.
– Do not use as a step or ladder.
– Do not use as a support or make
shift workbench.
– Do not hang from a crane.
– Do not dispose of the device or bat
tery in a fire or hot oven, and do not
crush or cut them mechanically;
this may cause an explosion. For
correct disposal, see chapter
.
2.2
Avoiding damage
– Do not open incorrectly. In particu
lar, the guard [1-12] must not be
opened (unscrewed). Maintenance
and repair must only be performed
by trained specialists.
– Prevent damage due to falling. En
sure stable footing on an anti-slip
surface and avoid the edges pro
truding over the surface. Secure
against falling. The machine must
always be checked after falling to
see whether any parts are damaged.
If external damage is present, do
not continue using the machine. For
fall heights of 1.0 m or more, trans
port mode must be activated: Set
the transport switch [1-13] to "0".
Additionally, contact customer serv
ice (see section
– Avoid damage caused by objects
accidentally falling on the machine
or the shipping container (incl. ma
chine). A check must always be per
formed after this kind of incident to
English
17
Summary of Contents for 205721
