Festool 575707, Original Instructions Manual

WARNING

Any maintenance or repair work that re­

quires opening of the motor or gear housing 

should only be carried out by an authorised 

Customer Service Centre (name supplied by 

your dealer)!
► Maintenance or repair work carried out by 

an unauthorised person can lead to the 

wrong connection of the power cord or oth­

er components, which in turn can lead to 

accidents with serious consequences.

CAUTION

Certain cleaning agents and solvents are 

harmful to plastic parts.
► Some of these include, but are not limited 

to: Gasoline, Acetone, Methyl Ethyl Ketone 

(MEK), Carbonyl Chloride, cleaning solu­

tions containing Chlorine, Ammonia, and 

household cleaners containing Ammonia.

Customer service and repairs must 

only be carried out by the manufac­

turer or service workshops. Find the 

nearest address at: 

www.festoolusa.com/service

Always use original Festool spare 

parts. Order no. at: 

www.festoolusa.com/service

EKAT

1

2

3

5

4

–

To ensure constant air circulation, always 

keep the cooling air openings in the motor 

housing clean and free of blockages.

–

In the event of a slowdown in performance 

or increased vibrations, blow and clean 

cooling air openings.

–

Keep the contacts on the machine, charger 

and battery pack clean.

Check all warnings on the electric power tool 

for readability and completeness. Replace 

missing or illegible warnings.

12 Accessories

Use only original Festool accessories and 

Festool consumable material intended for this 

machine. These components are designed spe­

cifically for this machine. Using accessories 

and consumable material from other suppliers 

will most likely affect the quality of your results 

and limit warranty claims. Machine wear or 

your own personal workload may increase de­

pending on the application. Protect yourself and 

your machine, and preserve your warranty 

claims by always using original Festool acces­

sories and Festool consumable material!
The order numbers of the accessories and tools 

can be found in the Festool catalogue or on the 

Internet under "www.festoolusa.com".
12.1 SYSTAINER
Systainer
Many Festool products are shipped in a unique 

system container, called "Systainer". This pro­

vides protection and storage for the tool and ac­

cessories. The Systainers are stackable and 

can be interlocked together. They also can be 

interlocked atop Festool CT dust extractors.
To open the Systainer

Turn the T-loc [SYS-b-1] to this posi­

tion.

To lock the Systainer

Turn the T-loc [SYS-b-1] to this posi­

tion.

To connect two Systainers
Place one Systainer on the top of the other 

(Fig. [SYS-a]).

Turn the T-loc [SYS-b-1] to one of 

this positions (Fig. [SYS-b]).

The Systainers are connected and locked.

A Systainer Classic Line can be connected 
to a Systainer T-Loc or to a Systainer

3 

from below via its four locking devices.
A Systainer T-Loc can be connected to a 
Systainer

3

 both from below and from 

above.

SYS-a

English

11