–
Always use original Festool sanding pads.
–
While using the long-life dust bag be
aware of electric charge. Always when
possible use an antistatic suction hose
with the power tool. A slight electric shock
may cause you to panic briefly and become
distracted, which may result in an accident.
–
Only use the mains adapter with this de
vice.
–
Only use the mains adapter together with
an original Festool plug it cable.
Battery pack and charger safety instructions
–
This charger can be operated by persons
with reduced physical, sensory or mental
capabilities or a lack of practical experi
ence and knowledge, provided they are su
pervised or have been instructed to use the
machine safely and understand the dan
gers of machine operation. Children are
not allowed use or play with the machine.
–
Do not open the battery pack or the charg
er!
–
Prevent metal parts (e.g. metal chips) or
fluids from entering the charger!
–
Do not use power adapters or battery
packs form other manufacturers to oper
ate the cordless power tool. Do not use
any charger from other manufacturers for
charging the battery pack. The use of im
permissible accessories may result in elec
tric shock and / or serious accidents!
–
Protect the battery pack from excessive
heat > 50 °C or constant heat sources such
as sunlight or naked flames!
–
Never use water to extinguish burning li-
ion battery packs! Use sand or a fire blan
ket.
–
Check the plug and the cable regularly and
should either become damaged, in order to
avoid a hazard, have them replaced by an
authorised after-sales service workshop.
–
Always pull the mains plug out of the sock
et when the charger is not in use.
3.3
Health hazard by dust
WARNING! various dust created by pow
er sanding, sawing, grinding, drilling and
other construction activities contains chemicals
known (to the State of California) to cause can
cer, birth defects or other reproductive harm.
Some examples of these chemicals are:
–
lead from lead-based paints,
–
crystalline silica from bricks and cement
and other masonry products, and
–
arsenic and chromium from chemically
treated lumber.
The risk from these expo
sures varies, depending on
how often you do this type of
work. To reduce your expo
sure to these chemicals:
work in a well ventilated
area, and work with approved safety equipment,
such as dust masks that are specially designed
to filter out microscopic particles. Wash hands
after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4
Intended use
The sanders are designed for sanding wood,
plastic, composites, paint/varnish, filler and
similar materials as directed. Metals and mate
rials that contain asbestos must not be proc
essed.
To guarantee electrical safety, the machine
must not be damp or operated in a damp envi
ronment. The machine must only be used for
dry sanding.
The user is liable for improper or non-in
tended use.
5
Technical data
Cordless orbital sander
DTSC 400 Li
RTSC 400 Li
Voltage
18 - 20 V
18 - 20 V
No-load speed
6000 - 10000 min
-1
6000 - 10000 min
-1
Sanding stroke
5/64" (2.0 mm)
5/64" (2.0 mm)
English
6
