Contents
1 About this manual....................................... 6
2 Symbols.......................................................6
3 Safety warnings...........................................6
4 Intended use................................................9
5 Technical data............................................. 9
6 Functional description.............................. 10
7 Commissioning..........................................10
8 Settings......................................................12
9 Working with the electric power tool........16
10 Service and maintenance..........................18
11 Accessories............................................... 19
12 Environment.............................................. 19
13 General information..................................20
14 Troubleshooting........................................ 21
1
About this manual
Save these instructions
It is important for you to read and understand
this manual. The information it contains relates
to protecting your safety and preventing prob
lems. The symbols below are used to help you
recognize this information.
DANGER
Description of imminent
hazard and failure to avoid
hazard will result in death.
WARN
ING
Description of hazard and
possible resulting injures
or death.
CAUTION Description of hazard and
possible resulting injuries.
NOTICE
Description of possible
damage of the device or its
surroundings.
2
Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Pull out the mains plug
Connecting the mains power cable
Disconnecting the mains power cable
CAUTION! Do not look directly into the
light beam!
Safety class II
Tool contains a chip which stores data.
Tip or advice
Handling instruction
Hz
hertz
W
watt
V
volt
~
a.c.
alternating current
n
0
no load speed
rpm
min
-1
revolutions per minute
lb.
pound
kg
kilogram
diameter
mm
millimetre
m
metre
"
inch
3
Safety warnings
3.1
General power tool safety warnings
WARNING! Read all safety warnings, in
structions, illustrations and specifica
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1 WORK AREA SAFETY
a. Keep work area clean and well lit. Clut
tered or dark areas invite accidents.
English
6
