11
Charging battery pack [3]
Light and battery capacity indicator
The LED on the lamp
[1-10]
is both a light
and a battery capacity indicator
[1-9]
.
The LED automatically indicates the charging state
of the battery pack (not NiCd and NiMH battery
packs) when the on/off switch
[1-4]
is pressed.
Settings
Consider the pictures on the fold-out page.
Changing direction of rotation [1-3]
• Switch to the left = clockwise rotation
• Switch to the right = counterclockwise rotation
Selecting the operating mode
Hammer drilling
Set selector switch
[1-5]
to hammer sym-
bol.
Screwdriving/drilling
Set selector switch
[1-5]
to drill symbol.
2
Inserting battery pack
click
BP/C 18
Removing battery pack
1
2
LED green – lit continuously:
charged > 60 %
LED green – flashing slowly:
charged 30 % – 60 %
LED green – flashing quickly:
charged 0 % – 30 %
LED yellow – lit continuously:
battery is empty
LED red – lit continuously:
bat-
tery, electronics or motor tem-
perature is outside the
permitted range.
LED red – flashing:
indicates a
general fault, e.g. incomplete
contact, short circuit, battery
pack faulty, etc.
Summary of Contents for BHC 18 Li
