12
Working
Extracting dry materials
Remember:
A damp main filter will clog more
quickly when dry materials are extracted. There-
fore, dry the main filter before extracting dust or re-
place the damp filter with a dry one.
Extracting fluids
The main filter shall only be used for extracting
dry materials.
Before extracting fluids, remove the filter bag (see
chapter Changing the filter bag). We recommend
using a special wet filter.
The dust extractor stops automatically when the
maximum level is reached.
After finishing work
Switch off the mobile dust extractor and pull out
the mains plug.
Wind up the mains power cable.
Empty the dirt trap.
Place the suction hose
[4-1]
and mains power
cable
[4-2]
in the top section. Insert the mains
cable through the recess
[4-3]
.
Vacuum and wipe off the inside and outside of
the mobile dust extractor.
A replacement filter bag can be stored in the
storage compartment
[4-4]
.
Place the mobile dust extractor in a dry room in-
accessible to unauthorised users.
WARNING
Not suitable to vacuum hazardous or toxic sub-
stances or dusts e.g. asbestos.
The filters will not be able to capture all particles
and may exhaust them back into the environ-
ment.
WARNING
Risk of injury
Do not evacuate combustible liquids!
CAUTION
Escaping foam and fluids
Switch off the machine immediately and empty
the dust container.
4
4-1
4-4
4-2
4-3
Summary of Contents for CT MIDI
Page 2: ......
Page 3: ......
Page 4: ...1 2 1 1 1 3 1 4 1 5 1 10 1 11 1 9 1 8 1 6 1 7 1 ...
Page 5: ......
