16
Dia cutting system DSC-AG 125
1 Technical
data
Exhaust Cover
DCC-AG 125
Tool 125
mm
Disc thickness
with a bar
max. 3 mm
without a bar
max. 6.5 mm
Cut depth (without a guide bar)
27 mm
Exhaust hose 27/36
mm
Weight 2.2
kg
Angular grinder
AG 125-14 DE
Voltage
220 – 240 V~
Frequency
50 / 60 Hz
Input 1400
W
Idle revolutions
3500 - 11000 min
–1
Peripheral velocity
80 m/s
Grinding spindle thread
M 14
Limits to interaction current
•
Constant electronics
•
Heat protection
•
Weight 2,3
kg
Protection level
II /
2 Symbols
Double
insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Read the instructions
Not to be included in municipal refuse
Advice or tip
3 Control
elements
[1-1]
Arresting
button
[1-2]
Exhaust
Cover
[1-3]
Power
cable
[1-4]
Angular
grinder
[1-5]
Switch
[1-6]
Threading for clamping and additional
handle
[1-7]
Spindle locking plunger
[1-8]
Rollers
[1-9]
Screw for setting bar clearance
[1-10]
Bar
guide
[1-11]
Gear
box
[1-12]
Bar
guide
[1-13]
Cut
indicator
[1-14]
Additional
handle
[1-15]
Speed control
Accessories that are illustrated or described here
are not always included in the scope of delivery.
The specifi ed illustrations can be found at the be-
ginning of the operating instructions.
4 Intended
use
Consisting of an angle grinder and extraction
hood, the Dia cutting system is designed for
grooving and cutting into concrete or stone ma-
terials without the use of water.
The user proper is responsible for improper us-
age.
5
Notes on Safety Prevention
5.1
General safety instructions
WARNING!
Read all safety warnings,
instructions, illustrations and specifi ca-
tions provided with this power tool.
Failure
to follow all instructions listed below may result
in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2
Safety instructions for all operations
General safety instructions for grinding, abra-
sive cutting and wire brushing:
a)
This power tool is intended to function as
grinding, sanding with sandpaper, wire brush-
ing and abrasive cutting. Read all safety warn-
ings, instructions, illustrations and specifi ca-
tions provided with this power tool.
Failure to
follow all instructions listed below may result
in electric shock, fi re and/or serious injury.
b)
Operations such as polishing is not recom-
mended to be performed with this power tool.
Operations for which the power tool was not
GB
