12
5-2
5-1
5
Constant Electronic function
The Constant Electronic function maintains an al-
most constant speed and load; this ensures that
the material is stirred evenly.
Tool settings
WARNING
Risk of injury, electric shock
Always pull the mains plug out of the socket
before performing any type of work on the
machine!
Height setting [5]
The working height of the machine can be individu-
ally adjusted to achieve an upright working position.
Push the casing of the ErgoFix adapter
[5-1]
in
the direction of the machine to move it as far as
it goes
[5-1]
and hold it tight.
By pulling on the stirrer rod, you can pull the
ErgoFix adaptor
[5-2]
out of the machine spindle.
In this way, you can adjust fi ve different working
heights. One step is 0.8 " (2 cm). The maximum
adjustment movement is 3.2 " (8 cm).
Then release the clamping ring of the ErgoFix
adapter
[5-1]
and check that the adapter
[5-2]
is seated securely in the machine spindle.
Quick change function
NOTE
Ensure that the adapter
[5-2]
remains clean.
Do not lubricate the adaptor
[5-2]
.
Only press the ErgoFix casing
[5-1]
when the
machine is not in operation.
The ErgoFix interface enables you to easily and
quickly remove the stirrer rod from the machine.
Push the clamping ring of the ErgoFix adapter
[5-1]
in the direction of the machine to move it
as far as it goes and hold it tight.
By pulling on the stirrer rod, you can pull the
ErgoFix adaptor
[5-2]
completely out of the ma-
chine spindle.
Summary of Contents for MX 1200 E EF
