14
- The ventilation holes on the motor hood must not
be blocked.
- The machine automatically switches off if the
carbon brushes are worn. The machine must be
sent to the workshop for maintenance work.
- We recommend that you clean the machine
regularly. Remove any dust, residual mixing ma-
terial and any other dirt. If you use solvent-based
cleaning agents, these may damage the painted
surfaces or the plastic parts. If you use these
cleaning agents, we recommend that you test the
effect of these agents on a small, concealed area.
The ventilation holes on the motor hood must not
be blocked.
-
Commission an authorised workshop to change
brushes, the power cable etc..
If the machine is
knocked in any way, it is also necessary to entrust
an authorised workshop in order to prevent any
mechanical or electrical danger arising.
- The packaged machine can be stored in a dry place
without heating as long as the inside temperature
does not fall below −5 °C. The unpackaged ma-
chine must only be stored in a dry, enclosed space
where the temperature does not fall below +5 °C
and where no extreme temperature fl uctuations
occur.
Accessories, tools
For safety reasons, only use
original Festool accessories and tools!
The accessory and tool order number can be found
in the Festool catalog or on the Internet under
www.
festoolusa.com
.
Environment
Do not dispose of the device as domestic waste!
Dispose of machines, accessories and packaging
at an environmentally responsible recycling centre.
Observe the respective national regulations.
Summary of Contents for MX 1200 E EF
