12
T 18+3 Li
GB
3
Intended use
Cordless drill suitable for
– drilling in metal, wood, plastic and similar mate-
rials,
– inserting and tightening screws
– use with Festool batteries BPC and BPS of the
same voltage.
The user is liable for improper or non-in-
tended use; this also includes continuous in-
dustrial operation.
4
Technical data
* Speed specifications with fully charged battery
pack.
** The maximum speed is reduced in the lower
torque stages (values in counterclockwise rotation).
5
Machine features
Accessories shown or described are sometimes not
included in the scope of delivery.
The specified illustrations appear at the beginning
of the Operating Instructions.
6
Commissioning
6.1
Belt clip
The belt clip allows a shot-term securing of the de-
vice in the work clothes. Insert the belt clip on the
designated side, right or left, and fix it with the
screw
[1a]
.
6.2
Changing the battery pack [2]
The capacity display
[1-10]
automatically displays
the charge state of the battery pack
[1-3]
when the
ON/OFF switch is actuated:
7
Settings
7.1
Changing direction of rotation [1-4]
• Switch to the left = clockwise rotation
• Switch to the right = counterclockwise rotation
7.2
Changing gear [1-6]
• Gear switch forwards (digit 1 visible) = 1st gear
• Gear switch to rear (digit 2 visible) = 2nd gear
7.3
Fastening
Adjust the switch so that its marking
[1-9]
faces the
screw symbol
[1-8]
.
Adjust the torque accordingly at the torque wheel
[1-12]
.
Position 1 = low torque
Position 25 = high torque
Cordless drill
T18+3 Li
Motor voltage
18 V
Idle engine speed*
1st gear 0 - 450 min
-1
2nd gear 0 - 1500 min
-1
Max. torque
Soft mate-
rial (wood)
35 Nm
Hard mate-
rial (metal)
50 Nm
Adjustable torque**
1st gear
0.8 - 8 Nm
2nd gear
0.5 - 6 Nm
Chuck clamping range
1.5 - 13 mm
Max. drill diameter
Wood
45 mm
Metal
13 mm
Tool holder in drill spindle
1/4 ’’
Weight excl. battery pack, incl.
CENTROTEC
1,1 kg
[1-1]
Buttons for releasing the battery pack
[1-2]
Bit store
[1-3]
On/Off switch
[1-4]
Right/left switch
[1-5]
LED lamp
[1-6]
Gear switch
[1-7]
Drilling symbol
[1-8]
Screwdriving symbol
[1-9]
Drilling/Fastening selector switch
[1-10]
Capacity display
[1-11]
Belt clip
[1-12]
Torque thumbwheel
[1-13]
Insulated gripping surfaces (grey shaded
area)
70 - 100 %
40 - 70 %
15 - 40 %
< 15 %
Recommendation:
Charge bat-
tery pack before further use.
CAUTION
Risk of injury
Always switch off the power tool before adjusting
settings!
