TCL 3
9
GB
6
Operation
6.1
Charger cable holder[1-3]
Unwind the cable completely from the
recess before using the charger.
6.2
Changing the battery pack [2]
Removing the battery pack[2 B]
Inserting the battery pack [2 A]
6.3
Charging the battery pack [1]
If a warm NiMH battery pack (> 37 °C) is in-
serted, the pack is charged with a reduced
charging current and will take longer to
charge.
The LED
[1-2]
on the charger indicates the
respective operating status of the charger.
7
Service and maintenance
Observe the following instructions:
– Keep the contacts on the machine, charger
and battery pack clean.
Customer service and repair
only through manufacturer or
service workshops: Please find
the nearest address at:
www.festool.com/Service
Use only original Festool spare
parts! Order No. at:
www.festool.com/Service
8
Environment
Do not dispose of the device in
household waste!
Recycle de-
vices, accessories and packaging.
Observe applicable country-spe-
cific regulations.
EU only:
European Directive 2002/96/EC
stipulates that used electric power tools must
be collected separately and disposed of at an
environmentally responsible recycling centre.
Information on REACh:
www.festool.com/reach
9
EU Declaration of Conformity
We declare under sole responsibility that this
product complies with the following direc-
tives and standards:
2004/108/EC, 2006/95/EC, 2011/65/EU (af-
ter 03.01.2013), EN 60335-1, EN 60335-2-
29, EN 61000-3-2, EN 61000-3-3, EN
61204-3.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Techni-
cal Documentation
03.04.2012
WARNING
Unauthorised voltage or frequency!
Risk of accident
X
The mains voltage and the frequency of
the power source must correspond with
the specifications on the machine's name
plate.
X
In North America, only Festool machines
with the voltage specifications 120 V/60
Hz may be used.
LED yellow - lit continuously
Charger is ready to use.
LED green - flashing quickly
Battery pack is charged to
maximum capacity.
LED green - flashing slowly
Battery pack is charged with
reduced current. LiIon is
charged to 80 %.
LED green - lit continu-
ously
Charging is complete or is not
restarted as current charge
status is greater than 80%.
LED red - flashing
General fault display, e.g.
incomplete contact, short cir-
cuit, defective battery pack,
etc.
LED red - lit continuously
Battery temperature is out-
side the permitted range.
Charger
Serial no.
TCL 3
10002345
Year of CE mark: 2012
EKAT
1
2
3
5
4
Summary of Contents for TCL 3
Page 2: ...1 1 4 1 1 1 3 1 2 1 2 klick 2a 2b ...
Page 3: ...3 4 4 mm Ø 5 mm m m 0 2 1 ...
Page 4: ......
Page 5: ......