8
Technical data
Cordless drill/screwdriver
TDK 12
TDK 15.6
Motor voltage
12 V
15.6 V
Idle-running speed
1. Speed
0 - 430 rpm
0 - 450 rpm
2. Speed
0 - 1400 rpm
0 - 1500 rpm
Max torque
Soft boring (wood)
20 Nm
25 Nm
Hard boring (metal)
28 Nm
36 Nm
Adjustable torque
1. Speed
2 - 7 Nm
2 - 7 Nm
2. Speed
0.5 - 2.5 Nm
0.5 - 2.5 Nm
Chuck capacity
1.5 - 13 mm
1.5 - 13 mm
Max. drill diameter for wood
25 mm
35 mm
Max. drill diameter for metal
14 mm
16 mm
Tool fi tting in chuck
1/4 “
1/4 “
Weight with battery pack
2.0 kg
2.3 kg
Charger
LC
45
Supply voltage (input)
230 - 240 V~
Line frequency
50/60 Hz
Charging voltage (output)
7.2 - 18 V=
Charging current
3 A
Quick charge
max. 3 A
Compensation charge pulsating
app. 0.06 A
Charging time for
NiCd 2.0 Ah app. 45 min
NiCd 2.4 Ah
app. 50 min
NiMH 3.0 Ah app. 70 min
Battery pack
BPS 12 S NiCd
BPS 12 S NiMH
Order number
492 268
491 821
Voltage
12 V
12 V
Capacity
2.4 Ah
3.0 Ah
Temp. range for charging
5 - 45° C
5 - 45° C
Temperature monitoring
u s i n g N T C r e s i s t o r
Weight
0.73 kg
0.75 kg
Battery pack
BPS 15.6 S NiCd
BPS 15.6 S NiMH
Order number
492 269
491 823
Voltage
15.6 V
15.6 V
Capacity
2.4 Ah
3.0 Ah
Temp. range for charging
5 - 45° C
5 - 45° C
Temperature monitoring
u s i n g N T C r e s i s t o r
Weight
0.9 kg
0.92 kg
The specifi ed illustrations can be found at the beginning of the operating instructions.
1
Before starting up, please observe
the following
1.1
Intended use
Cordless drills are suitable for drilling metal,
wood, plastics and similar materials, as well as
tightening and screwing in screws (into wood,
up to a diameter of 6 mm). The LC 45 battery
charger is designed for recharging the battery
pack listed.
The user is liable for damage and injury
resulting from incorrect usage!
1.2
Safety instructions
Before using the machine, read the
enclosed safety instructions and these
operating instructions carefully and
thoroughly.
Save all enclosed documents and pass the ma-
chine with all these documents only.
1.3
Noise and vibration information
Cordless drill/screwdriver
The typical values determined in accordance
with EN 60745 are:
Sound pressure level
72 dB(A)
Sound-power level
83 dB(A)
Measuring uncertainty allowance
K = 4 dB
Measured acceleration
<2.5 m/s²
The noise level can exceed 85 dB(A)
during operation.
Wear
ear
protection!
