10
Once you’ve completed all the steps and put the batteries in your remote control it’s time to turn everything on.
Step 5. Power up your Fetch Mighty
Connect your Fetch Mighty to power
Check the Fetch Mighty Connection
Turn on your Fetch Mighty
Turn on the Power at the wall socket. The power light on your
Fetch Mighty will light up.
Standby light is blue when your Fetch Mighty is powered on.
If it is red, the box is in standby mode and you should press
the power button on the remote control to turn it on.
Internet light on your Fetch Mighty is blue when you have a
broadband connection. If it is red, there is no live connection.
During initial start-up it will change from red to blue.
Recording light on your Fetch Mighty will flash when you
press any button on the remote. If it doesn’t flash the box is
not responding to the remote.
Select Source / Input on TV
Plug the red end of the power supply unit into the Fetch Mighty.
Plug the power supply unit into the wall power socket.
Turn on your TV.
On your TV remote press Source/Input or AV Select.
Select the HDMI port you plugged your Fetch Mighty into.
1
1
2
2
3
Note
The back panel of your box may look different to the
diagram but the functionality remains the same
(see Page 16).